
JITC Memo, JTE, Special Interoperability Test Certification of the Avaya Ethernet Routing
Switch (ERS)5500 Series with Release 6.2.100.073
3
Table 2. SUT Interface Interoperability Status (continued)
Interface
Applicability UCR 2008,
Change 2
Reference
Threshold
CR/FR
1
Status Remarks
Co D A
10000Base-X C C C 5.3.1.3.1 1-6 Met
SUT met CRs and FRs
with the following IEEE
Standard: 802.3ae
(10GBASE-SR,
10GBase-LR)
802.11a C C C 5.3.1.3.1/5.3.1.7.2 1-6 Not Tested
802.11b C C C 5.3.1.3.1/5.3.1.7.2
1-6 Not Tested
802.11g C C C 5.3.1.3.1/5.3.1.7.2
1-6 Not Tested
4
802.11n C C C 5.3.1.3.1/5.3.1.7.2
1-6 Not Tested
4
802.16 C C C 5.3.1.3.1/5.3.1.7.2
1-6 Not Tested
4
NOTES:
1. The SUT high-level CR and FR ID numbers depicted in the Threshold CRs/FRs column can be cross-referenced in Table 3. These high-
level CR/FR requirements refer to a detailed list of requirements provided in Enclosure 3.
2. Core and Distribution products must minimally support 100Base-X (802.3u) and 1000Base-X (802.3z). Access products must minimally
support one of the following standards: 802.3i (10BaseT), 802.3j (10BaseF), 802.3u (100BaseT/F), 802.3z (1000BaseF), or 802.3ab
(1000BaseT). Other rates and standards may be provided as conditional interfaces.
3. JITC tested all these interfaces with the exception of the 10BaseT interface. JITC analysis determined the 10BaseT interface is low risk
for certification based on the vendor’s LoC to the IEEE 802.3i and the testing data collected at all other data rates.
4. The SUT does not support this interface. This interface is not required for a core, distribution, or access switch.
LEGEND:
A Access
C Conditional
Co Core
CR Capability Requirement
D Distribution
FR Functional Requirement
ID Identification
IEEE Institute Of Electrical And Electronics Engineers, Inc.
JITC Joint Interoperability Test Command
LoC Letter of Compliance
R Required
SUT System Under Test
UCR Unified Capabilities Requirements
Table 3. SUT CRs and FRs Status
CR/FR
ID
Capability/ Function Applicability
1
UCR
Reference
Status Remarks
1
General Performance Parameters
Performance Parameters
Required 5.3.1.3 Met
Port Interface Rates
Required 5.3.1.3.1 Met
Port Parameter Requirements
Required 5.3.1.3.2 Met
Class of Service Markings
Required 5.3.1.3.3 Met
VLAN Capabilities
Required 5.3.1.3.4 Met
Protocols
Required 5.3.1.3.5 Met
QoS Features
Required 5.3.1.3.6
Partially
Met
2
Network Monitoring
Required 5.3.1.3.7 Met
Security
Required 5.3.1.3.8 Met
3
2
E2E Performance Requirements
Voice Services
Required 5.3.1.4.1 Met
4
Video services
Required 5.3.1.4.2 Met
4
Data services
Required 5.3.1.4.3 Met
4
Kommentare zu diesen Handbüchern